Quick answer

A recipe can produce its target ingredient while leaving most of the batch as other substances. Check the mixture after each operation to find the first step where the result differs from your goal.

In-game chemistry troubleshooting, updated 11 November 2026. Player reports identify failure paths; exact builds and MOD setups vary. No complete purity formula or site-run gameplay test.
Probably Stolen chemistry purity too low: find the failed step · Game item reference
Game item referenceImage source ↗

First separate a rejected batch from a low-grade product

A Steam player followed the Nomore instructions and reported roughly 11% purity. Their later step-by-step account included significant remaining protein, reducing agent and other material. That is one player's batch, not the expected result for every save. A Chem Finisher refusal is another problem: meeting a recipe's acceptance conditions and making a high-purity product are separate checks.

What you seeCheck nextDo not conclude yet
The Finisher refuses the mixtureSelected recipe, required active ingredient and volume, wet/dry condition, current buildThat the extraction reaction failed
The item is made but purity is lowActive ingredient share and the other substances in the final scanThat adding more of every reagent will help
A machine runs but the next scan is unchangedPower, accepted container, installed module and the step's starting compositionThat another full night will fix it
References: 12

Find the first operation that changed the mixture the wrong way

Use the Composition Spectrometer or the available in-game inspection to record the contents before and after each operation. Keep the same recipe and a small test batch while troubleshooting. Changing the heat, reagent amount and filter together makes it impossible to tell which change mattered.

  1. Record the game build, target product, chosen recipe, starting ingredients and their measured amounts.
  2. After blending or extraction, check whether the desired intermediate actually appeared before filtering anything.
  3. After each reagent, filter or evaporation step, record what rose, fell or stayed unchanged. Stop at the first unexpected change and inspect that operation's conditions.
References: 12

Check what the filter can remove, and what it might remove too soon

The Steam replies distinguish dissolved ingredients from debris made by a reaction. They also warn that filtering plant mush before extracting the desired ingredient may remove useful input. Treat these as community troubleshooting leads for the cited build, then verify the before-and-after scan in your own game.

  1. If the target extract never appeared, revisit extraction conditions before adding a stronger filter.
  2. If unwanted material remains dissolved, check whether the recipe calls for a conversion step before separation; do not assume a filter removes every substance.
  3. If the target ingredient falls after filtration, check whether you filtered its precursor or used the filter at the wrong stage. Keep a small comparison sample.
References: 12

Check finishing conditions after you have the intended mixture

Match the selected Finisher recipe to its active ingredient, volume and wet/dry requirement. The total liquid volume alone does not show how much of the desired ingredient is present. If a dry batch is refused, first check the installed version: official patch 1.0.0.5 fixed a trace-water problem in the evaporator and added tolerance for trace moisture. Our evaporator guide covers that separate failure path.

  1. Scan the mixture before finishing and note the active ingredient and remaining solvent or contaminants.
  2. Check the recipe and current patch, then finish one small batch. Scan the item afterwards instead of inferring its grade from the mixture alone.
  3. Save the input scan, each intermediate scan, machine setup and final result if the same mismatch repeats; this is enough to ask a focused question or report a reproducible bug.
References: 23

Lipobond: recover the reagent, not the residue

A new November 11 discussion describes a player combining bought reagents in a shared pitcher, then trying to recover Lipobond with the alcohol-only module. Treat those as two separate failure points: mixing stock hides which bottle introduced contamination; the wrong recovery module changes what reaches the receiving vessel.

Before combining reagent bottles, scan them separately. For Lipobond recovery, put it in the evaporator’s Container, fit ordinary Quality modules without Solvent Recovery, provide power and place an empty bottle in Distillate. After overnight processing, scan that receiving bottle. Do not feed the concentrated contaminants left in the original container back into your recipe. Water or alcohol mixed with Lipobond may also be recovered, so this is not a guarantee of laboratory-pure output.

Do not apply this step to every bottle labelled Base or Acid. The evaporator’s recoverable liquids are not all reagents. Fish-tank and Chem Finisher purification tricks in the same thread lack a verified current-build procedure here; they are not included as guaranteed solutions. All steps on this page concern the game only.

References: 42

Questions & answers

Why did following the Nomore recipe produce about 11% purity?

That figure came from one Steam player's first batch. Their later scan still contained substantial non-target material. Compare your own intermediate scans to find where the target ingredient was lost or unwanted material remained; 11% is not a fixed outcome.

References: 1

Should I filter after every step?

No universal filtering schedule is established here. Identify the substance you want to keep and the one you want to remove, then compare scans before and after a small test. In the cited discussion, filtering a precursor too early was a specific risk.

References: 1

Can this guide calculate the final purity?

No. The source material does not verify a complete current-build model for every reaction, filter, rounding rule and Finisher effect. Use the in-game scan for actual values; unknown effects stay unknown here.

References: 2

Why did “purifying” Lipobond leave a dirtier bottle?

Check which vessel you inspected. Nonvolatile residue stays in Container; the recovered reagent belongs in Distillate. The alcohol-only recovery module does not collect Lipobond.

References: 4
Sources & version notes

Source titles are kept in their original language.

  1. Steam players — chemistry questions and a low-purity Nomore batch ↗Community · Checked 2026-11-11
  2. GameWikiStation — Chemistry workshop reference ↗Community · Checked 2026-11-11
  3. Probably Stolen official patch 1.0.0.5 — evaporator and dry-input fixes ↗Official · Checked 2026-11-11
  4. Steam: Purifying Lipobond / Base / Acid? ↗Community · Checked 2026-11-11