Quick answer

Paying for shop power does not fill an empty Energy Cell. First inspect the power source installed in the stopped machine and its Required Energy warning. Recharger charges cells placed inside it; PowerBloc supports eligible adjacent cells and machines. Both are overnight charging arrangements, not an instant full refill.

Full-release troubleshooting, including official 1.0.0.12 changes. Placement and charging descriptions are community-supported; exact charging rates depend on the setup and are not presented as an independently tested universal table.
Probably Stolen Power Guide: Recharger, PowerBloc and Machines Not Working · Game item reference
Game item referenceImage source ↗

Shop electricity and stored charge are different

An ordinary battery-powered machine draws from its installed cell. Recharger and PowerBloc use the shop’s power service to replenish compatible cells. Having the lights on therefore does not prove that the machine has enough energy for its next job. A cell’s capacity also does not tell you its remaining charge.

Update 1.0.0.12 made machine tooltips flag an insufficient source under Required Energy. It also added an unpowered alarm display and a nightly warning when the alarm cell cannot cover its draw. Read those warnings before sleeping, especially if you depend on the alarm for protection.

References: 21

Use Recharger as a battery rotation station

  1. Put a compatible depleted Energy Cell into the Recharger’s charging storage and ensure the shop’s Power Service is active. Leaving it beside the charger is not the same as inserting it.
  2. Advance a night and inspect the numeric charge. A small increase can be real even if the coloured battery bar looks almost unchanged.
  3. Move a sufficiently charged cell into the production machine and return the depleted one to the charger. For a time-sensitive batch, use a charged spare rather than assuming one night will fully recharge an empty cell.
References: 24

Place PowerBloc beside the actual target

  1. Place the PowerBloc and its target in the same inventory container. Use direct side contact with a compatible cell or a machine containing one. A diagonal corner, empty grid square or separate box does not create the intended adjacency.
  2. Keep shop power active and advance the night. The cell can remain installed in the adjacent machine. An Energy Cell inside a Recharger is a documented exception; do not count that as receiving another PowerBloc charge.
  3. Afterward, inspect both machine output and remaining charge. A running machine may use more energy than the nearby PowerBloc restores. Falling charge alone therefore does not prove the charger failed.
References: 23

A short failure checklist

SymptomWhat to do next
Power paid, machine still stoppedInspect its installed source and Required Energy; then check recipe inputs and output space.
Charger seems inactiveCheck cell compatibility, the correct placement, shop power and whether a night has passed.
Battery steadily drainsThe machine may consume more than you replace. Rotate charged cells or reduce demand before expanding production.
Enough energy, still no resultPower is only one prerequisite. Follow the machine-specific guide for missing water, reagents, output containers or unfinished cycles.
References: 21

Current Converter and the 1.0.0.12 Hijack change

A Current Converter is an alternative source for a machine’s power slot, not a charger you place beside the shop. Its grid consumption has a cost. Keep its operating bill separate from the price of the machine and from the stored charge in ordinary Energy Cells.

Official 1.0.0.12 says Power Line Hijack makes Current Converters 15% cheaper to run and lets them work during blackouts; Hijack II and III reduce costs further. This does not mean all batteries recharge faster or that converter power becomes free. The patch also distinguishes a Lower Levels Power Outage from a blackout event.

References: 51

A repeatable check before sleeping

Check production machines and the alarm for insufficient-source warnings; keep the relevant shop power service active; put depleted spare cells inside their charger; make sure the next batch has its inputs and somewhere to go. Prioritise the machines needed for tomorrow’s deliveries over charging every cell to its maximum.

References: 21

Questions & answers

Why does my battery lose charge beside PowerBloc?

An operating machine also spends energy. If consumption exceeds replenishment, the remaining charge falls even while charging works. Check the nightly demand and actual placement first.

References: 2

Does a PowerBloc boost batteries inside a Recharger?

The documented exception excludes cells inside a Recharger. Arrange PowerBloc around compatible loose cells or other eligible machines instead.

References: 23

Does Power Line Hijack double the charging rate?

Do not confuse it with the Commercial Grade Power Supply Unit upgrade. The official 1.0.0.12 Hijack changes concern converter operating cost and blackout operation, not a blanket doubling of battery charging.

References: 14
Sources & version notes

Source titles are kept in their original language.

  1. Official cumulative update 1.0.0.12 ↗Official · Checked 2026-11-11
  2. Energy Cells, charging and machine power ↗Community · Checked 2026-11-11
  3. PowerBloc placement and troubleshooting ↗Community · Checked 2026-11-11
  4. Steam: 20 Hours In — power and production discussion ↗Community · Checked 2026-11-11
  5. Current Converter operation and patch context ↗Community · Checked 2026-11-11